Change Light
- David Avgikos
Used by light objects only.
The Change Light action will change any value of the selected light. Different light types will have different parameters.
Spots
Light Color
Opens a color picker dialog to select the color and intensity of the light.
Intensity
Sets the overall brightness of the light.
Cone Angle
Sets the cone angle for the spot between 0 to 80 degrees.
Edge Sharpness
Expressed as a percentage of the cone angle, edge sharpness defines the area between the inner and outer light cones. A value of 0% would create a hard-edged light cone.
Falloff
Defines the distance attenuation of the selected light.
Flashing Interval
Sets the selected light to flash on and off in milliseconds. A value of 0 stops the light from flashing.
Area Lights
Light Color
Opens a color picker dialog to select the color and intensity of the light.
Intensity
Sets the overall brightness of the light.
Width
Sets the width of the area light. This can affect the highlights and shadows in a scene.
Height
Sets the height of the area light. This can affect the highlights and shadows in a scene.
Falloff
Defines the attenuation of the selected light.
Flashing Interval
Sets the selected light to flash on and off in milliseconds. A value of 0 stops the light from flashing.
Point Lights
Light Color
Opens a color picker dialog to select the color and intensity of thes elected light.
Intensity
Sets the overall brightness of the selected light.
Falloff
Defines the attenuation of the selected light.
Flashing Interval
Sets the selected light to flash on and off in milliseconds. A value of 0 stops the light from flashing.